Marijuana Indoor Grow Room Layout

Marijuana Indoor Grow Room Layout

Benefits of growing weed inside your home

Although it’s more resource-intensive than growing outdoors, you can control every aspect of your environment and what you put in your plant, so growing inside your home will enable you to call in your setup to grow some primo weed.

Reside in an apartment or condo or a cottage? You can grow weed virtually anywhere, even folks who do not have a backyard or a lot of extra area.

Unlike outside growing, you aren’t tied to the sun and the seasons. You can let your plants get as big as you desire, flip them into flower, harvest, and then start another batch right away. You can grow whenever you desire, even straight through winter season.

Even in legal states, you might wish to hide your crop from judgmental next-door neighbors and certainly from possible thieves. Growing inside your home allows you to grow inconspicuously behind a locked door.

Step 1: Designate a marijuana grow space or space

The first step in setting up your individual marijuana grow is creating a suitable area in which to do it. This space doesn’t even require to be a typical space it can be a closet, tent, cabinet, spare space, or a corner in an unfinished basement. Just bear in mind that you’ll require to tailor your equipment (and plants) to fit the space.

… But think big

When designing your area, you’ll need to consider not only the amount of room your plants will require, however also your lights, ducting, fans, and other equipment. You’ll also have to leave enough room for you to work. Marijuana plants can double in size in the early stages of flowering, so make sure you have adequate head space!

If your grow room is a cabinet, camping tent, or closet, you can simply open it up and eliminate the plants to deal with them; otherwise, you’ll require to ensure you leave yourself some breathing space.

Cleanliness is vital

Ensure your area is quickly sterilized; cleanliness is necessary when growing inside your home, so easy-to-clean surface areas are a must. Carpets, drapes, and raw wood are all hard to clean, so prevent these materials if possible.

Keep it light-tight

Another essential criterion for a grow room is that it be light-tight. Light leakages throughout dark periods will confuse your plants and can trigger them to produce male flowers.

Step 2: Select your marijuana grow lights

The quality of light in your grow room will be the primary environmental factor in the quality and amount of your yield, so it’s a good concept to pick the very best lighting setup you can pay for.

Here’s a short rundown of the most popular types of marijuana grow lights utilized for indoor growing.

CONCEALED grow lights

HID (high-intensity discharge) lights are the industry requirement, commonly used for their combination of output, performance, and value. They cost a bit more than incandescent or fluorescent fixtures, but produce even more light per unit of electricity used. Alternatively, they are not as effective as LED lighting, but they cost as little as one-tenth as much for similar units.

The two main types of HID lamp utilized for growing are:

Metal halide (MH), which produce light that is blue-ish white and are usually utilized during vegetative growth.

High pressure sodium (HPS), which produce light that is more on the red-orange end of the spectrum and are used throughout the flowering phase.

In addition to bulbs, HID lighting setups require a ballast and hood/reflector for each light. Some ballasts are developed for use with either MH or HPS lamps, while numerous newer designs will run both.

If you can’t manage both MH and HPS bulbs, start with HPS as they provide more light per watt. Magnetic ballasts are cheaper than digital ballasts, however run hotter, are less efficient, and harder on your bulbs. Digital ballasts are typically a better choice, however are more expensive. Be careful of cheap digital ballasts, as they are typically not well shielded and can produce electromagnetic interference that will affect radio and WiFi signals.

Unless you’re growing in a big, open space with a great deal of ventilation, you’ll need air-cooled reflector hoods to install your lights in, as HID bulbs produce a lot of heat. This needs ducting and exhaust fans, which will increase your preliminary cost however make controlling the temperature level in your grow space much easier.

Published